COMMERCIAL RO WATER TREATMENT PLANT

Approx. Rs 1.3 Lakh / PieceGet Latest Price

I.Pressure Sand Filter:13” X 54” vessel Containing Gravel & Sand (pentair ).

Material of Make : FRP/ Equivalent

Test Pressure : 10 Kg/ cm2

Opening : Top

Valve Specification

Make : Initiative

Type : Multi port Valve side mounting

Size : 1.”

Media : Pebble, Silex, Sand.

Strainer : 100 Micron

Purpose: Water stream from sand filter is passed through activated carbon filter bed which ensure

odor and colorless clear filtrate is also from chlorine.

II. Activate Carbon Filter: 13” X 54” Vessel Containing Gravel & Carbon.

Pentair make.

Material of Make : FRP/ Equivalent

Test Pressure : 10 Kg/ cm2

Opening : Top

Valve Specification

Make : Initiative

Type : Multi port Valve side mounting

Size : 1.”

Strainer : 100 Micron

Media : Activated Carbon, : 1” Multi Port valve ( Nylon ).

III. Dosing Pump – Purpose : To remove the effect of Calcium and Magnesium responsible in the water

this in turn forms scaling on the membrane and pipelines.

Dosing pump : 1 No

Make : E-Dose, Seko/Injecta Italy/Ultimate.

IV. Pre Filter: 20” X 20” Micron PP Filter USA 2 pcs (Big Blue).

Micron Filter stage 1

Purpose : After anti Scaling system water passes through micron filter stage 1having

filter cartridge of 20 micron porosity so as to produce clear water up to 20micron level.

Make : PP

Qty : One No’s

Type : 20”

Micron Filter stage 2

BIG BLUE MAKE.

V. High pressure pump, CRI : CR. 2/18 for 1000 LPH.

Purpose : To feed Ro Membrane more than the osmotic pressure, considering flux

rate

Flow and recovery.

Material of Construction : S/S (4KW) Max

Type : Vertical centrifugal Multistage

Make : Sumo / CRI/Luby / Equivalent

Qty : One

Feed Pump 01 Hp. CRI MAKE

VI. Membrane: 40” X 40” (4pcs) CSM or DOW for 1000

Purpose : To reduce TDS (Total Dissolved Solids) level up to 99% and hence bring

the value dissolved solids to minimal level.

Type : Thin Film Composite

Dia : 4”

Length : 40”

No. of Membrane : Four.

Make : CSM/ Hydronotics / Hi-tech.

Pressure Meter: 4 Pcs.

VIII. Indicators: Power, Working, Low Pressure, High Pressure, Flushing.

XI. Rota Meter (Panel Mounted)

Additional Information:

Approx. Rs 3.2 Lakh / PieceGet Latest Price

I. Pressure Sand Filter:18” X 65” vessel Containing Gravel & Sand (pentair ).
Material of Make : FRP/ Equivalent
Test Pressure : 12 Kg/ cm2
Opening : Top
Valve Specification
Make : Initiative
Type : Multi port Valve side mounting
Size : 1.5”
Media : Pebble, Silex, Sand.
Strainer : 100 Micron
Purpose: Water stream from sand filter is passed through activated carbon filter bed which ensure
odor and colorless clear filtrate is also from chlorine.
II. Activate Carbon Filter: 18” X 65” Vessel Containing Gravel & Carbon.
Pentair make.
Material of Make : FRP/ Equivalent
Test Pressure : 10 Kg/ cm2
Opening : Top
Valve Specification
Make : Initiative
Type : Multi port Valve side mounting
Size : 1.”
Strainer : 100 Micron
Media : Activated Carbon, : 1.5” Multi Port valve ( Nylon ).
III. Dosing Pump – Purpose : To remove the effect of Calcium and Magnesium responsible in the water
this in turn forms scaling on the membrane and pipelines.
Dosing pump : 2 No
Make : E-Dose, Seko/Injecta Italy/Ultimate.
IV. Pre Filter: 20” X 20” Micron PP Filter USA 4 pcs (Big Blue).
Micron Filter stage 1
Purpose : After anti Scaling system water passes through micron filter stage 1having
filter cartridge of 20 micron porosity so as to produce clear water up to 20micron level.
Make : PP
Qty : One No’s
Type : 20”
Micron Filter stage 2
 
Purpose : After Micron filter stage 1water passes through micron filter stage 2 having
filter cartridge of 10 micron porosity so as to produce clear water suitable for Membrane feed.
Make : PP
Qty : One No’s
Type : 20”
BIG BLUE MAKE.
V. High pressure pump, CRI : 5 HP for 3000 LPH.
Purpose : To feed Ro Membrane more than the osmotic pressure, considering flux
rate
Flow and recovery.
Material of Construction : S/S (4KW) Max
Type : Vertical centrifugal Multistage
Make : Grand fos / Equivalent
Qty : One
Feed Pump 02 Hp. CRI MAKE
VI. Membrane: 40” X 80” (3pcs) CSM or Toray for 3000.
Purpose : To reduce TDS (Total Dissolved Solids) level up to 99% and hence bring
the value dissolved solids to minimal level.
Type : Thin Film Composite
Dia : 8”
Length : 40”
No. of Membrane : Three.
Make : CSM/ Hydronotics / Hi-tech.
VIII. Dosing pump
Pressure Meter: 4 Pcs.
XI. Indicators: Power, Working, Low Pressure, High Pressure, Flushing.

Additional Information: